Furuno FR-10, Руководство оператора

Страница: 52 / 171

2. OPERATION
2-16
2.14 Cursor
The cursor functions to find the range and bearing to a target or the latitude and lon-
gitude position of a target. Use the cursorpad to position the cursor and read the cur-
sor data. Cursor data appears at the bottom of the screen and by default shows the
bearing to the cursor location, followed by the range to the cursor location.
2.14.1 How to change the cursor data type
You can show the cursor data as range and bearing (from your ship to the cursor) or
as latitude and longitude at the cursor location. Position and heading signal are re-
quired for either data type.
1. Press the MENU key to open the menu.
2. Press  or  to select [Others], then press the ENTER key.
3. Press

or

to select [Cursor Data], then press the ENTER key.
Cursor data
(bearing and range,
or latitutde and longitude)
NM
0.5
Cursor
+
VECTOR:TRU 06:00
+ 0.0°R 0.000NM
)6HWXS *DLQ0RGH
&XUVRU'DWD 5QJ%UJ