Furuno FR-10, Руководство оператора, Страница: 32 / 171

1. INSTALLATION & WIRING
1-16
1. Press the MENU key to open the menu.
2. Open the [File] menu and press the ENTER key.
3. Press  or  on the cursorpad to select the menu referring to below table, then
press the ENTER key.
4. Press the CANCEL/HL OFF
key to close the window.
1.4.5 How to change units of measurement
You can change the units of measurement for range and speed with the following pro-
cedure.
1. Open the [Units] menu.
2. Set the range and speed units as desired.
Menu Description
Export Setting Data Exports setting data (upper than [Tests]) to USB memory.
Cannot set same file name.
Export Installation Data Exports installation data (lower than [Tests]) to USB memory.
Cannot set same file name.
Import Setting Data Imports setting data (upper than [Tests]) from USB memory.
Popup window to select file name will appear.
Import Installation Data Imports installation data (lower than [Tests]) from USB mem-
ory.
Popup window to select file name will appear.
Delete Setting Data Deletes setting data (upper than [Tests]) from USB memory.
Delete Installation Data Deletes installation data (lower than [Tests]) from USB mem-
ory.
Export Log Data Exports log data to USB memory.
Popup window for confirmation appears.
Store Log Data Stores log data to USB memory.
to confirm overwriting the existing data appears.
Remove USB Memory Prepares to remove attached USB memory from the FR-10/
12.
Popup window will appear.
Menu item Available options
[Range Unit] NM, km, SM