28
6.2.3
C23 Unit for temperature
Select degree Celsius [
C
] or degree Fahrenheit [
F
].
6.2.4
C24 Temperature offset
By adding a positive or [-] negative value here, it will be added
as an offset before displayed as the temperature.
6.3
C30 Compass Settings
To return to normal PAGE, press
SET
when the text [rET] is
displayed.
6.3.1
C31 True or magnetic course
This function is only used when the instrument is connected in
the Nexus Network. [MAG On] will display bearing, course and
Wind direction as magnetic. The LCD indication is (MAG).
Select [OFF] to display all as true.
6.3.2
C32 Magnetic deviation
Set the deviation direction first, i.e. [+E] (East) or [W] (West),
then enter the magnetic value in 1/10 of a degree.
6.3.3
C33 Reference for Compass, static or GPS
Select heading Compass [Hdc] when the Compass transducer
is connected to the Nexus Network (recommended).
Select course over ground [COG] when a GPS navigator is
connected,
but no Compass.
Select
STA
for static use at fixed installations, such as at the
yacht club, airfield, ferry berth and so on.
In static PAGE you may mount the transducer in the direction of North, or if not
possible, you may adjust the transducer electronically. See C54, 6.4.4.
Note!
[COG]
as reference will only operate properly when the boat is doing speed over
ground.
