27
6.1.3
C13 Displaying boat speed, trip log and
temperature, option
When set to OFF, the functions will be removed from the display.
The Wind Data instrument may be used as a Server in the Nexus
Network, transmitting the log and temp to other FI-30 instruments
without having the information displayed in this instrument.
6.1.4
C14 Display NAV functions, option
NAV functions are only useful when the Wind Data is connected in
a Nexus Network with Compass transducer and a navigator. The
selection
NAV On
will add the functions BTW, XTE etc.
6.1.5
C15 Beep when SET is pressed
Setting
On
will make a beep at every key press, while
OFF
is
silent.
6.2
C20 Calibration of Log
To return to normal PAGE, press
SET
when the text [rET] is
displayed.
6.2.1
C21 Select unit for speed
Unit for speed, knots (KTS), km/h (K/h) or miles/h (m/h).
6.2.2
C22 Calibration of log transducer
Calibration value for speed and distance (1.00 - 1.99).
Drive the boat a measured distance at normal speed.
Compare the distance with the trip counter.
Calculate the value with the following formula.
True distance from the sea chart: T
Log trip counter distance:
L
The current calibration value:
C
New calibration value:
N
If you suspect a current in the water, drive the boat in both directions and divide trip
counter distance by two.
If the Wind Data is installed with FI-30 Server where the log is already calibrated,
no further calibration is needed.
