11
3.1
Installing cable
The power cable is connected via a 3A fuse from the battery or at the boats fuse panel
and direct to the instrument or Server. One red and one black power wire is included.
Note
, set C71 On (see 6.5.1)
Always connect a 3 AMP fuse between Power supply and instrument.
3.2
Connections in Nexus Network
If you already have a Nexus Network i.e. a Server, it is more practical to connect the
transducer to the Server due to the single instrument cable installation.
Note
, set C71
OFF (see 6.5.1)
The instrument is then connected to the Server’s Nexus Network terminal (pin 5, 6, 7
and 8) or any instrument .
Server
Transducer
From Server or other
FURUNO instrument
3A Fuse
Black
Scree
n
Red
Green
Yellow
White
