Furuno Felcom 82, Руководство оператора

Страница: 88 / 230

4. HANDSET COMMUNICATIONS
4-6
Dialing by first pressing the [ ] key
1. Confirm that the signal strength indication is showing at least one vertical bar
and the indication “Ready” is displayed.
2. Pick up the handset and press the [ ] key. The “dial” display appears. (See
page 4-3.)
3. Dial subscriber’s complete number.
Note: If you misdial, press the [ ] key. Press the [ ] key again and then dial
number. Further, dial each digit within five seconds of the previous digit,
otherwise the call will be canceled.
4. Press the [#] (end code) key. The “calling” display appears. (See page 4-4.)
The remaining procedure is the same as from step 4 in “Direct dialing” on
page 4-3.
4.3.2 Dialing prefix number
You may wish to automatically enter a prefix code anytime the handset is picked
up or the [
] key is pressed. This is useful for automatically dialing a part of an
often-called number.
Registering prefix dialing number
The prefix dialing number is useful for dialing parts of often-called numbers such
as an LES area or service code. This function is done from the Administration
mode. See page 2-10 for how to choose the Administration mode.
1. Press [FUNC Quit], [7] and [3] to display the Prefix Code input screen.
7 3 P r e f i x C o d e
P r e f i x D i a l :
E n t e r : [ E n t ]
Prefix code input screen
2. Enter prefix number (max. 10 digits), considering where you dial the most. For
example, enter 00300813 (003, KDDI, 00: Automatic call, 81, Japan, 3,
Tokyo) if most of your calls go to Tokyo.
3. Press the [Ent] key.
4. Press the [FUNC Quit] key to close the menu.
To delete the prefix number, hit the [DEL Prty] key at step 2.