Furuno Felcom 82, Руководство оператора

Страница: 164 / 230

7. HSD COMMUNICATIONS
7-4
Command (format)
Set the V.25bis command format for address calls sent from the HSD Terminal to
the FELCOM 82. Select HDLC (default setting) or BSC depending on
specifications of the HSD Terminal.
8 6 C o m m a n d
1 H D L C
2 B S C
E n t e r : [ E n t ]
HSD menu, command format selection screen
Character (format)
Choose the character format for address calls sent from the HSD Terminal to the
FELCOM 82. Select 8bit (default setting) or 7bit depending on specifications of
the HSD Terminal.
8 7 C h a r a c t e r
1 8 b i t / N o n e
2 7 b i t / O d d
E n t e r : [ E n t ]
HSD menu, character format selection screen
Ignore DTR
Choose whether the HSD terminal (router, etc.) from which to receive an
address call outputs the DTR signal or not. Choose “Normal” (default setting) for
HSD terminal which outputs the DTR signal; “Ignore” for HSD terminal which
does not output the DTR signal.
8 8 I g n o r e D T R
1 N o r m a l
2 I g n o r e
E n t e r : [ E n t ]
HSD menu, ignore DTR selection screen