Furuno Felcom 82, Руководство оператора

Страница: 46 / 230

3-4
7. Enter answerback code (max. 20 characters). If you don't know the complete
answerback code, enter a part of it or subscriber's telex number.
Note: The answerback code is used by the LES to verify identification in
automatic and programmed telex. When a receiving station is called it
sends the answerback code to the sending station and if it is different
from what is registered here the line is disconnected. Answerback code
is not applicable to manual telex. Further, if it is not entered messages
may be garbled depending on the operator to which you are
connected.
8. If desired, press the [
↓
] key and enter remarks (max. 25 characters).
9. Press the [Esc] or [Enter] key to finish.
10. Press the [Esc] key several times to return to the standby display.
Deleting stations
Delete station name with the [Backspace] key at step 3 in above procedure, and
then press the [Enter] key.
3.1.4 Creating message files
There are two types of telex messages: routine and confidential. This section
shows how to create both, beginning with routine.
Creating routine message files
At the standby display, press [F1] and [1] to select New Text. The display
provides an untitled window for creating a message.
< [1] UNTITLED1 >
0001|
TELEX 1 Char. [Line 1/ 1 Col. 1] [Insert ]
---+---+---+---+---+---+---+---+---+---+---+---+
Line Number
Cursor
Telex input;
capital letters No. of
characters
input Cursor
position Possible to insert
character at
cursor position
Untitled window