Furuno FCV-2100, Руководство по установке

Страница: 31 / 59

3. INITIAL SETTINGS
3-3
3.2.2 Monitor setting
Set the monitors (main/sub) from the service menu.
1. Select [Shared Settings] on the [Service] menu.
The [Shared Settings] menu appears.
2. Select the display resolution from the [Resolution] menu.
Selectable resolution: XGA (1024x768, default setting), SXGA (1280x1024),
UXGA (1600x1200), Full HD (1920x1080) or WUXGA (1920x1200)
Note: This selection is available for main monitor port (DVI-D1) only. XGA reso-
lution is fixed for monitors connected to sub monitor ports (DVI-D2/RGB).
For main monitor settings, go to step 6. For sub monitors, go to step 3.
3. Select the sub monitor position (left/right) from the [Sub Monitor Position] menu.
4. Select the sub monitor display resolution from the [Sub Monitor Display Resolu-
tion] menu.
Selectable display resolution: XGA
5. Select the [External Fish Finder] to [On], where an external monitor and an exter-
nal fish finder are connected.
The message window “Settings will be reset.” appears.
The setting should be left [Off] while no external monitor is connected.
• Off: The echo pictures for this equipment and external sounder are displayed
on main monitor.
FCV-2100 [ver 0252446-xx.xx]
Main monitor: FCV-2100 echo picture Sub monitor: External fish finder