Furuno FCV-2100, Руководство по установке

Страница: 27 / 59

2. WIRING
2-13
2.2.5 External KP control
To control the external KP, connect the external fish finder with a MPYCSLA-4 or
equivalent cable (local supply). Refer to the interconnection diagram at end of this
manual to connect the cable.
1. Fabricate the cable ends referring to the figure below.
2. Open the cover of the transceiver unit.
3. Detach the WAGO connector (TB2) from the board.
4. Unfasten the seal nut of EXT-KP port and disassemble the seal assembly.
Remove a seal grommet to pass the cable.
5. Pass the cable into the seal nut and seal assembly, then insert the cable into the
unit through the cable gland.
6. Connect the cable cores to the WAGO connector referring to the interconnection
diagram.
6
6
Drain wire Drain wire
150 150
20 20
Armor Inner sheath
Vinyl tape
Pass the heat shrinkable tube (local supply)
onto the drain wire.
Attach the crimp-on lug FV1.25-4(LF)
to the core.
WAGO connector WAGO connector
Terminal opener Terminal opener
EXT-KP port