2.1
Installation in the fixed mode
To install the camera properly, the user should follow the steps
:
STEP 1:
Choose the right place for the camera – above or in front of the
projector intended to be connected with the camera
.
STEP 2:
Install the metal angle and screw it to the projector hanger in a way
to be as close as possible to the axis of the projector lens.
STEP 3:
Put the camera on the metal angle so both camera and projector
look in the same direction. The camera can be installed on the
projector in any, however stable way i.e. disabling any
unwanted movement. It can be done with double sided tape,
anti-slip pad or metal clamp.
Suggested way of installing the camera
Not suggested way of
installing the camera
ATTENTION:
1.
If the ceiling is the place for installing the camera (projector), it should be placed
upside-down (the bottom of the camera facing oriented to the ceiling just like the
projector).
2.
If the screen is the one with the backside projection, the camera can be placed
behind the screen, together with the projector.
3.
In case of portable operation, put the camera directly on the projector (on the
enclosed anti-slip pad) as close as possible to the axis of the projector lens.
funtronic sp. z o.o.
all rights reserved
page: 7 z 30
