Funktel TETRA FT4, Руководство по эксплуатации

Страница: 98 / 152

Operation

Messaging/Text messages
98
Transmitting a status message
A status message is a pre-defined text message that cannot be modified by the
sender. Only bit-coded data are transmitted to the recipient. This makes the transmis-
sion time very short. The data are decoded on the recipient's unit, the original
message is displayed. The prerequisites is:
 Each predefined text message has the same meaning for the sender and recipi-
ent; the assignment of the numbers (status values) to the texts must be identical in
the templates.
 The data to be transmitted are encoded in the same manner on the sender's and
the recipient's unit.
Sending a status message (menu-based status templates)
Transmit a predefined text message (status template) by selecting the

M
ESSAGES
> S
TATUS TEMPLATES
function in the menu of the radio set.
Prerequisite:

The display shows the idle display.
Perform the following steps:
1. In the display, navigate to M
ENU
> M
ESSAGES
> S
TATUS
-T
EMPLATES
.
The list of status templates (predefined text message) is displayed.
2. Highlight the desired status template using the ‹
CURSOR KEYS
(9) › .
3. Press the ‹
RIGHT MENU KEY
(8) › to execute the O
PTIONS
function.
The FT4 is shown here
8
The S
TATUS
O
PTIONS
menu is displayed.
4. Highlight the S
END
menu item.
5. Press ‹
RIGHT MENU KEY
(8) › S
ELECT
.
The T
ARGET NUMBER
input field is displayed.
6. In the T
ARGET NUMBER
field , enter the “SSI” number of the recipient or the “Group
SSI” of a group by using the ‹ 1
TO
9, 0 › (12) keys.