manualshive.com logo in svg

Funktel TETRA FT4, Руководство по эксплуатации

Поделиться
Скачать
Funktel TETRA FT4 Скачать руководство пользователя страница 44

First steps

Charging the battery

44

Charging the battery

Always charge batteries with system-compatible chargers supplied by Funktel. These 
are optimally suited for the radio set and the battery. Always use the chargers outside 
of hazardous areas (explosive atmospheres).

Charging the FT4 battery with a Desktop Charger II FT4/

Desktop Station FT4

The Desktop Charger II FT4 and Desktop Station FT4 chargers charge both the 
battery in the radio set and a spare battery. When the radio set and the spare battery 
are connected with the charger at the same time, the battery in the radio set is 
charged first. After this, the charging process of the spare battery starts. 
The charging time for an empty battery is roughly 5 to 8 hours.

Charging the FT5 battery with a Desktop Charger FT5/

Desktop Station FT5 and

Battery Charger FT5 

The FT5 Desktop  Station  and the FT5 Desktop Charger  charge the battery in the 
radio set while the battery can be charged individually in the FT5 Battery Charger . 
The charging time for an empty battery is roughly 5 to 8 hours.

TIP

In addition, the radio set can be configured with the Configurator tool by means of the 
Desktop Station FT4 / Desktop Station FT5.

Connect the charger to the power supply

Perform the following steps:

 1.

Connect the plug-in power supply unit with the charger.

 2.

Plug the plug-in power supply unit into a suitable power outlet.

Done.

Содержание TETRA FT4

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды