Funktel TETRA FT4, Руководство по эксплуатации

Страница: 38 / 152

Design and function

Display
38
Security Database

Flash/inter-
nal

SD card
Shows the active memory location (storage) of
the configuration data of the radio set. Selection
and display of the internal database (Flash) as
well as external databases (max. 4) on SD
cards. To change this, highlight the preferred
database with the aid of the cursor keys/naviga-
tion rocker
(9) and select by means of the right
menu key (8) . If a PIN has been specified in the
active database, this is requested before the
switch is made. Once the PIN has been
entered, the radio set boots up with the new
selection. The databases can be secured indi-
vidually by means of different PIN codes.
Notes:
 Switching the databases is not possible in
Secury mode.
 It is possible to block the switching of data-
bases in the Security menu; all databases
are then hidden.
Change PIN The PIN to lock the radio set and to provide
access to configuration databases, internal
Flash or external SD cards can be changed.
The default PIN is
“0000” and new numbers
can be specified individually in the menu of the
radio set under Security in “Change PIN”. The
length of the PIN is specified as 4 characters (
0-
9, *, #) .
PIN & screen
saver This function locks the radio set automatically
when the screen saver is used. The PIN is
requested in order to deactivate.
Transmit Inhibit This function prevents any transmission pro-
cesses by the radio set and is indicated in the
header by means of a half red antenna. A
special TXI message can be sent to a target
address when the transmit inhibit function is
switched on/off.
Note: This function is only displayed after acti-
vation in the TETRA Configurator.
Functions in menu (cont'd)
Designation Function