Funktel TETRA FT4, Руководство по эксплуатации

Страница: 129 / 152

Personal Emergency Signal (PES) Functions

Placing in operation
129
4. Press the ‹right menu key› (8) to execute the function.
The FT4 is shown here
8
The radio set will then prompt you to perform the sensor test, see section „Sensor
test“.
After successfully completing the sensor test, the radio set logs in at the personal
emergency signal control centre.
 
Done.
Sensor test
During the sensor test, the radio set tests the integrated sensors. Before the radio set
logs into the personal emergency signal control centre, the radio set will prompt you
to test the sensors.
Please note:
During the sensor test, the sensors for all emergency signal functions programmed
on the radio set are being tested. In the meantime, you have to initiate a variety of dif-
ferent actions on the radio set. These actions are described in section „Performing
the sensor test“ (p. 130).
You will be guided through the test procedure in the S
ECURY
S
ENSOR TEST
menu.
Each individual sensor is tested consecutively. When a sensor passes the test, the
pertinent display changes from
T
EST
to OK . In addition, an audible signal sounds
during the test, until all sensors have been determined to be fault-free.
Display with menu of the S
ECURY
S
ENSOR
T
EST