Funktel TETRA FT4, Руководство по эксплуатации

Страница: 137 / 152

Personal Emergency Signal (PES) Functions

Operation
137
4. Press the ‹right menu key› (8) to execute the function.
The FT4 is shown here
8
The S
ECURY
S
ENSOR TEST
menu is displayed.
The radio set will then prompt you to perform the sensor test, see section „Sensor
test“ (p. 129).
After successfully completing the sensor test, the display indicates the current
log-in status, e.g. "Secury - logged into Secury server".
 
Done.
Please note:
During the sensor test, the sensors for all emergency signal functions programmed
on the radio set are being tested. In the meantime, you have to initiate a variety of dif-
ferent actions on the radio set. These actions are described in Section „Performing
the sensor test“ (p. 130).
If your radio set detects a faulty sensor, the display in question remains set to T
EST
.
Note: If the mode of login of the radio set on the per-
sonal emergency signal (PES) system is configured
with the “automatic” value, then the option of cancel-
ling the process by exiting the “Secury Sensor Test”
by using the left menu key to select ‘back” is no
longer available when performing a manual sensor
test.

If the radio set reaches the point in time for the

24-hour check without having completed a sensor test
or having completed it successfully, then it transmits a
technical alarm to the personal emergency alarm
control centre.
Display with menu of the S
ECURY
S
ENSOR
T
EST