manualshive.com logo in svg

Funk-Electronic Piciorgros RTU-81, Руководство пользователя

Поделиться
Скачать
Funk-Electronic Piciorgros RTU-81 Скачать руководство пользователя страница 107

Funk-Electronic Piciorgros GmbH  

RTU-810

 

 

 

V2.30 - Page 107  of   126 

 

 

6

 

Accessing the local I/O 

6.1

 

Control and Measurement I/O (RTU Functionality) 

(Note: in the following paragraph Ports A, B, C, & D are not to be confused with IP 
ports mentioned elsewhere in this document).  
 
The RTU-810 includes control and measurement inputs and outputs integrated with the 
modem. The basic version (RTU-810/DA2)has 16 on-off inputs (Ports A and B) and 8 
on-off outputs (Port C). A further optional version has Port D, which can be ordered as 
8 additional on-off outputs, or as 4 analog inputs. 
 
Each of the 16 on-off inputs of Port A have independent event counting functions that 
can be enabled by the user. Port A inputs counters operate as event counters, while Port  
B counters operate as time-totalizing counters. The maximum counting rate [input pulse 
rate] is 10 Hz.  
 
The control and measurement I/O can be accessed using any of the following protocols: 
 

 

MoP / MoP2: This is the Piciorgros radio protocol which is used to access the 
RTU-810 from a serial master device, OPC-server, MDP-310.200 and in Point-
to-(Multi)point links with a RTU-810 master 
 

 

MODBUS/IP and -RTU through the serial interface or Ethernet interface. 
 

 

MODBUS-RTU via the radio network with a serial master in ZZTR mode 
 

 

IEC-60870-5-101 (unbalanced): through the serial interface or over the radio 
network using a ZZTR serial master. (Future option) 
 

 

IEC-60870-5-104 through Ethernet interface or over the radio network (Future 
option) 
 

 

DNP3 through Ethernet interface or over the radio network (Future option) 

 
The protocols IEC-60870-5-104 and DNP3 do support unsolicited messages. In this 
case the RTU-810 will actively inform the SCADA master if any input value has 
changed. This saves a lot of traffic compared to polling protocols like MODBUS which 
require continuous data transfer to get up-to-data values from the field. 
 

Содержание RTU-81































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды