FUNAI TD6D-M101, Руководство по обслуживанию

Страница: 23 / 107

1-10-1 E3TF0INT
HOW TO INITIALIZE THE HDD & DVD/VCR
To put the program back at the factory-default,
initialize the HDD & DVD/VCR as the following
procedure.
< HDD/DVD Section >
1. Turn on the HDD & DVD/VCR.
2. To put the HDD & DVD/VCR into the HDD mode,
press [HDD] on the remote control unit.
3. To put the HDD & DVD/VCR into the Version
display mode, press [VARIABLE SKIP], [1], [2],
and [3] buttons on the remote control unit in this
order within three seconds.
Fig. a appears on the screen.
Fig. a Version Display Mode Screen
4. Press [ENTER/OK] button, then the HDD & DVD/
VCR starts initializing. When the initializing is
completed, the HDD & DVD/VCR exits the Version
display mode and turns off the power
automatically.
* To move into the Normal mode from the
Version display mode, press [RETURN/BACK]
button on the remote control unit instead of
[ENTER/OK] button.
* When [STANDBY-ON] button is pressed
before [ENTER/OK] button is pressed, the
HDD & DVD/VCR exits the Version display
mode, then the power turns off.
Note: By initializing, “Current Clock”, “Setup
Changing Item”, “Channel Setup” and “Timer
Program” are initialized.
MODEL NAME :
DVB-T VERSION :
FE VERSION :
BE VERSION :
TT VERSION :
DV UNIQUE ID :
LD ADJUSTMENT :
DISC ADJUSTMENT :
DEFAULT SETTING : ENTER
EXIT : RETURN
OK
OK
*1: "*******" differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
F/W VERSION DISP
*******
***.***
***_***_***
*************
********
******** ********