Fukuda Denshi LX-7230 Скачать руководство пользователя страница 47

Страница: 47 / 112

6. SpO

Monitoring (LX-7230N)

CAUTION



Precautions for Use of adhe

sive sensor, MAX-R



Do not reuse the sensor on other patients. This is a sterilized product

and it is intended for single patient use only.



Circulation distal on the sensor site should be checked routinely. The

site must be inspected every 8 hours to ensure adhesion, skin
integrity, and correct sensor site. If skin integrity changes, move the
sensor to another site



Do not use the sensor on patients who exhibit allergic reactions to the

adhesive tape.



Do not get the acetone/alcohol cleaning solution in the patient’s eyes.



Failure to apply the sensor properly may cause incorrect

measurements.



While the sensor is designed to reduce the effects of ambient light,

excessive light may cause inaccurate measurements. In such cases,
cover the sensor with an opaque material.



Intravascular dyes or externally applied coloring such as dye or

pigmented cream may lead to inaccurate measurements.



Take care when removing the MAX-R so that the adhesive does not

damage delicate facial tissue.



The MAX-R is not recommended for patients wearing oxygen or

anesthesia masks.



Excessive motion may compromise performance.



Do not pull the sensor cable to remove the sensor from the device.



In the event of damage to the sterile packaging, do NOT use. Make

sure to check whether the packaging and product is cracked or
damaged before use. If there is any damage.



Do not immerse in water or cleaning solutions. Do not resterilize.

For additional warnings, cautions or contraindications when using
sensors with Nellcor-compatible device, refer to each SpO

sensor

instruction manual.

Содержание LX-7230

















































































































Результаты поиска

Содержание LX-7230

Отзывы:

Похожие инструкции для LX-7230

Бренды по названию

Популярные бренды

Fukuda Denshi LX-7230, Руководство по эксплуатации

Результаты поиска

Содержание LX-7230

Отзывы:

Похожие инструкции для LX-7230

Бренды по названию

Популярные бренды