Fukuda Denshi LX-7230, Руководство по эксплуатации

Страница: 98 / 112

13. Maintenance and Inspection
78
Daily Check List
No.
Inspected Date Inspected by Location
Device Type LX-7230N/KM S/No. Date of Purchase
Items Details Criteria Judgment
Appearance
Visually check for any damage,
cracks, chip, peeled label, and
loosen screw on the housing.
No abnormality should be
found.
□ OK/ □ NG
Visually check for the ring
condition of the battery
compartment lid. No damage, kink, floating,
and adhesion of dust
should be found.
□ OK/ □ NG
Battery
Compartment
Visually check for the contact
springs, inside the LX-7230, to
the battery and the lock lever of
the battery compartment lid.
No deformation, cracks,
and rust should be found.
□ OK/ □ NG
Power Supply
Turn the power ON/OFF to verify
proper switch operation. With batteries installed,
the LCD should turn ON.
□ OK/ □ NG
ECG Connectors
Visually check the connectors of
the cable and the LX-7230.
No damage, chip, and
adhesion of dust should
be found.
□ OK/ □ NG
ECG Lead cable
Visually check each lead for
damages. No crack and damage
should be found.
□ OK/ □ NG
SpO
2
Relay Cable
(LX-7230KM only)
Visually check the cable, and
connector for damages. No crack, chip and
damage should be found.
□ OK/ □ NG
SpO
2
Sensor
(Probe)
Visually check the cable, optical
receiver, LED, and connector for
damages.
No crack, chip, damage,
and adhesion of dust
should be found.
□ OK/ □ NG
Wireless Channel
Verify whether the transmitting
channel and group ID are the
same with the receiving monitor.
Must match the wireless
channel check list.
□
OK/
□
NG
Transmission
Function
Turn the power ON and make
sure the information is displayed
on the receiving monitor. Waveforms and values
should be received
without any problem.
□
OK/
□
NG
Display Function
Turn the power ON and verify
each display condition, such as
SpO
2
value and bargraph.
All data should be
properly displayed.
□
OK/
□
NG
Periodic Check
Check the date of the previous
periodic check. Should be within one
year.
□
OK/
□
NG
Comment