Fukuda Denshi HLX-561, Руководство по эксплуатации

Страница: 21 / 28

10
4.
Setting the Receiving Channel of the Monitor
Select the telemetry receiver channel to match that of the telemetry
transmission module. The monitor will display the channel number. If
the transmission module has a different group code than that of the
receiver, set the telemetry receiver group code to correspond to the
telemetry transmission module. (For details on selecting the channel
and group code, refer to the operation manual for the appropriate
monitor.)
If the selected channel number does not correspond to the frequency
that is actually received, an alarm waveform will be displayed to alert
the staff to interference (see example below).
NOTE:
The interference prevention function is not effective
unless the receiver has the interference detection
function.
Verify the receiver has the interference detection
function and the proper channel number set.
Example of display on the DS-5800NX central monitor
INTERFERENCE
message with alarm