Fukuda Denshi HLX-561, Руководство по эксплуатации

Страница: 17 / 28

6
Reconnect the power cord and turn the DS-5100 ON. Set the
telemetry channel from the telemetry set-up display on the
DS-5100.
For details in selecting the telemetry channel, refer to the operation
manual for the DS-5100.
WARNING
Operation of this equipment requires the prior coordination
with a frequency coordinator designated by the FCC for the
Wireless Medical Telemetry Service.
To check the system, and verify proper transmission from the
HLX-561 to the telemetry receiver, check the central receiver and
monitor to ensure the waveforms and alphanumeric data are
properly displayed.
The wireless network system is now functioning properly.
Place the cover back in its
original position while at the
same time inserting the
antenna into the antenna
hole. Replace the cover onto
the DS-5100 by replacing
the screw at the bottom.