Fujitsu SPARC Enterprise T2000, Руководство по обслуживанию, Страница: 86 / 174

3-46 SPARC Enterprise T2000 Server Service Manual • April 2007
2. Issue the following command:
3. If you want to view all logged messages, issue the following command:
3.7 Managing Components With Automatic
System Recovery Commands
The Automatic System Recovery (ASR) feature enables the server to automatically
configure failed components out of operation until they can be replaced. In the
server, the following components are managed by the ASR feature:
■
UltraSPARC T1 processor strands
■
Memory DIMMS
■
I/O bus
The database that contains the list of disabled components is called the ASR blacklist
(
asr-db
).
In most cases, POST automatically disables a faulty component. After the cause of
the fault is repaired (FRU replacement, loose connector reseated, and so on), you
must remove the component from the ASR blacklist.
The ASR commands (
TABLE 3-11
) enable you to view, and manually add or remove
components from the ASR blacklist. You run these commands from the ALOM CMT
sc>
prompt.
# more /var/adm/messages
# more /var/adm/messages*
TABLE 3-11
ASR Commands
Command Description
showcomponent
*
* The
showcomponent
command might not report all blacklisted DIMMS.
Displays system components and their current state.
enablecomponent
asrkey Removes a component from the
asr-db
blacklist,
where asrkey is the component to enable.
disablecomponent
asrkey Adds a component to the
asr-db
blacklist, where
asrkey is the component to disable.
clearasrdb
Removes all entries from the
asr-db
blacklist.