Fujitsu SPARC Enterprise T2000, Руководство по обслуживанию, Страница: 77 / 174

Chapter 3 Server Diagnostics 3-37
3.4.5.1 Correctable Errors for Single DIMMs
If POST faults a single DIMM (
CODE EXAMPLE 3-1
) that was not part of a hardware
upgrade or repair, it is likely that POST encountered a correctable error that can be
handled by PSH.
In this case, reenable the DIMM and run POST in minimum mode as follows:
1. Reenable the DIMM.
2. Return POST to minimum mode.
3. Reset the system so that POST runs.
There are several ways to initiate a reset. The following example uses the
powercycle
command. For other methods, refer to the SPARC Enterprise T2000
Server Administration Guide .
4. Replace the DIMM if POST continues to fault the device in minimum mode.
CODE EXAMPLE 3-1
POST Fault for a Single DIMM
sc> showfaults -v
ID Time FRU Fault
1 OCT 13 12:47:27 MB/CMP0/CH0/R0/D0 MB/CMP0/CH0/R0/D0 deemed
faulty and disabled
sc> enablecomponent
name-of-DIMM
sc> setkeyswitch normal
sc> setsc diag_mode normal
sc> setsc diag_level min
sc> powercycle
Are you sure you want to powercycle the system [y/n]? y
Powering host off at MON JAN 10 02:52:02 2000
Waiting for host to Power Off; hit any key to abort.
SC Alert: SC Request to Power Off Host.
SC Alert: Host system has shut down.
Powering host on at MON JAN 10 02:52:13 2000
SC Alert: SC Request to Power On Host.