System expansions
Installing and removing a board
36 - English
A26361-K547-Z400-1-7419
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the
BIOS Setup
. If necessary, change the settings. Further information is provided in the
PCI board documentation.
Removing board with clips
Ê
Open the workstation (see "Opening the workstation").
Ê
Disconnect the cables connected to the board.
2
a
1
3
5
4
Ê
Push the edges of the clip together (1) and remove it (2).
Ê
Remove the board from the workstation (3).
Ê
Place the board into appropriate packaging.
!
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the cover plate.
Ê
Push the rear slot cover plate into the slot (4). Ensure that the end of the cover engages into
the guide (a).
Ê
Replace the clip (5) which fixes the board. Make sure that the clip engages when released.
Ê
Close the system unit (see "Closing the Workstation").
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the
BIOS Setup
. If necessary, change the settings. Further information is provided in the
PCI board documentation.
