Preparation for use and operation
Connecting the workstation to the mains voltage
12 - English
A26361-K547-Z400-1-7419
Connecting the workstation to the mains voltage
If your workstation does not have a voltage adjuster on the power supply, it will automatically adjust
for the correct rated voltage.
If the power supply on your workstation displays a manual voltage adjuster, ensure that the
displayed rated voltage correctly matches the local rated voltage.
100 V - 127 V
200 V - 240 V
100 V - 127 V
200 V - 240 V
1
1
1
1
1 =
Notch for inserting the screwdriver
Ê
Check the voltage setting.
!
The value indicated with an arrow must be compatible with the local rated voltage:
115 = 100 V to 127 V 230 = 200 V to 240 V
If the voltage setting is incorrect, then lift out the manual voltage adjuster with a
screwdriver (1), turn it to the required setting and reinsert it.
