Preparation for use and operation
Setting up the workstation
8 - English
A26361-K547-Z400-1-7419
Setting up the workstation
!
When installing your workstation, give consideration to the recommendations and safety
notes in the "Safety, Warranty and Ergonomics" booklet.
Set up the workstation only in its correct orientation. The points to observe are illustrated
on the following pages.
We recommend that you place your equipment on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is possible
that the rubber feet of the devices will mark the surface they stand on.
Do not expose the workstation to extreme environmental conditions (see chapter
"Technical data"). Protect it from dust, humidity and heat.
Provide at least 200 mm of clearance in front of and behind the fan area of the
workstation to ensure adequate ventilation. Do not cover the ventilation areas of the
monitor and the workstation.
Do not place several workstations one above the other.
Connecting devices
!
The power plug must be disconnected!
Read the documentation on the external device before connecting it.
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order described below.
Connecting cables
·
Turn off all power and equipment switches.
·
Unplug all power plugs from the mains supply.
·
Connect all cables at the workstation and peripherals. Under all circumstances, please observe
the safety notes provided in the "Important notes" chapter.
·
Plug all data communication cables into the utility sockets.
·
Plug all power cables into the mains supply.
Disconnecting cables
·
Turn off all power and equipment switches.
·
Unplug all power plugs from the mains supply.
·
Unplug all data communication cables from the utility sockets.
·
Disconnect all cables from the workstation and peripherals.
·
Route the cables so that no dangerous points (tripping) result.