Fujitsu SCENIC S, Руководство по эксплуатации

Страница: 64 / 69

System expansions
56
A26361-K523-Z100-6-7619
Replacing the lithium battery
In order to permanently save the system information, a lithium battery is installed to provide the
CMOS-memory with a current. A corresponding error message notifies the user when the charge is
too low or the battery is empty. The lithium battery must then be replaced.
!
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery may be replaced only with an identical battery or with a type
recommended by the manufacturer.
Do not throw lithium batteries into the household waste. They must be disposed of in
accordance with local regulations concerning special waste.
Make sure that you insert the battery the right way round. The plus pole must be on the
top!
1
2
3
+
+
+
+
Ê
Lift the contact (1) a few millimetres and remove the battery from its socket (2).
Ê
Insert a new lithium battery of the same type into the socket (3).