12
11. Operations
Pull the Rack Console slowly toward you until the slide rails lock. If
the slide rails are not locked, the Rack Console can move
unexpectedly. Be careful not to catch your fingers when you pull or
push on the slide module or when you open or close the LCD, etc.
Do not apply any strong force to the Rack Console or rack when the
Rack Console is pulled out or when the monitor is opened and being
used, as there is a risk that the rack can topple over.
Do not press strongly on the monitor's screen, scratch it with sharp
objects, or bring magnetic objects near it. Doing so can damage the
monitor.
Note that the corners of the open Rack Console can be dangerous if
bumped into. Always be careful when the device is open.
We recommend that you store this device in the rack when not in
use, or when you operate another device such as a server or other
peripheral equipment.
11-1.Operating the Rack Console
1. Turn left two finger screws on the right and left sides of the front of the device. Pull this
device while you hold the handle. Pull the device out until it locks into place.
Pulling out the Slide Module
Caution: Do not use device unit mounted on pull-out rails as a surface on which to
put things or as a work surface, and strictly avoid leaning on or against them.
Cable management part
RC25 Rack Mount Kits
Slide rail
Fixing spring
Slide rail
Finger screw
Handle
Finger screw
CAUTION
