25
13. Cleaning the Rack Console
Turn off the power and unplug the power cable from the power socket.
Do not use cleansers that contain abrasives, or organic solvents such
as benzene, thinner, or alcohol.
Do not apply water, soap, or spray-type cleaners directly onto the Rack
Console. If liquids enter the interior of the Rack Console, it can cause
malfunctions or damage.
Wipe the device and monitor cabinet with a clean dry cloth. If there is excessive dirt, wipe it
off with a soft, damp cloth that has been thoroughly wrung out.
Remove dust with a soft brush.
Clean the keyboard and pointing device with a soft, dry cloth such as gauze. If there is
excessive dirt, wipe it off with a cloth that has been damped with water or neutral detergent
diluted with water and has been thoroughly wrung out. After you use a neutral detergent,
wipe off the detergent on the device with a damp cloth that has been thoroughly wrung out.
Remove dust with a soft brush.
Clean the monitor screen with a soft dry cloth such as gauze.
Remove dust with a soft brush.
14. Environmental Protection
Environmentally-friendly product design and development
This product has been designed in accordance with the Fujitsu standard for "environmentally
friendly product design and development". This means that key factors such as durability,
selection and labeling of materials, emissions, packaging, ease of dismantling and recycling
have been taken into account.
This saves resources and thus reduces the harm done to the environment. Further
information can be found at:
http://ts.fujitsu.com/products/standard_servers/index.html
(for the EMEA market)
http://primeserver.fujitsu.com/primergy/concept/
(for the Japanese market)
Energy-saving information
Devices that do not need to be constantly switched on should be switched off until they are
needed as well as during long breaks and after completion of work.
Packaging information
This packaging information doesn’t apply to the Japanese market.
Do not throw away the packaging. You may need it later for transporting the system. If
possible, the equipment should only be transported in its original packaging.
CAUTION
