Fujitsu primergy TX150 Скачать руководство пользователя страница 184 | Manualshive

Страница: 184 / 305

Fujitsu primergy TX150 Скачать руководство пользователя страница 184

184

Chapter 7 Installing Internal Options

7.1 Before Installing Hardware

Options

The following types of hardware options can be installed in this server.

`

If the optional devices listed below are purchased, refer to the following to check the packaged items
before installing.

• Memory

"B.1 Memory" (pg.291)

• Internal Hard Disk Units

"B.2 Internal Hard Disk Units" (pg.292)

`

When installing and removing options, make sure to use the removed screws on the same devices that
were last installed or removed. Failure to do so can damage the device.

`

The types of optional devices listed in this manual are liable to be updated without any notice. Please
be forewarned.

3.5-inch internal option

5-inch internal option

Expansion cards

Memory

modules

«
...
182
183
184
185
186
...
»

Содержание primergy TX150


















































































































































































































































































































Отзывы:

Нет отзывов