Fujitsu primergy TX150 Скачать руководство пользователя страница 110 | Manualshive

Страница: 110 / 305

Fujitsu primergy TX150 Скачать руководство пользователя страница 110

110

Chapter 3 OS Installation Using ServerStart

Settings values in wizards

`

Setting items in wizards are set to the values set on the first server. For installation on subse-
quent servers, you must change the following items in the “OS installation wizard”. For other
items, change the settings as necessary. You do not need to start up wizards where no settings
will be changed.

`

If the settings for the first server are not reflected to wizards, perform the procedure over again
from copying the floppy disk.

3.5.3 Installation in Preconfiguration Mode

Edit the configuration file and perform installation in preconfiguration mode.
If ServerStart is not installed in the client computer where the preconfiguration mode is executed, refer
to "2.4 Preparation for Using ServerStart on a Client Computer" (

pg.53) to install ServerStart. If a

different version of ServerStart has been installed, uninstall it and install the proper version. For details
on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" (

`

ServerStart starts up when it is installed. However, be sure to follow these installation procedures.
Performing the procedure in "3.2.1 Starting Up the Preconfiguration Mode" (

pg.75) deletes the

contents of the ServerStart floppy disk, making the disk unavailable for installation on multiple servers.

1

Start up ServerStart.

If ServerStart has already been started, you do not have to restart it. If it is not started, perform the
following startup procedures.

When the CD has been copied on Windows 2000 Professional/Windows XP
Professional

1. Click [Start]

→

[Programs]

→

[Fujitsu ServerStart]

→

[ServerStart].

ServerStart starts up and the [Welcome to ServerStart] window appears.

When Windows NT is used or CD has not been copied

1. Insert the ServerStart Disc 1 CD-ROM into the client computer.

ServerStart starts up and the [Welcome to ServerStart] window appears.

2

Select the OS to be installed.

The preconfiguration mode starts up.

table: Settings to be Changed for Installation on Subsequent Servers

Window

name

Setting item name

Remarks

User
Information

Computer name

The setting must be changed when the second
and subsequent servers are on the same
network as the first server.

Product ID/CD key

The setting must be changed.

Network
Protocol

IP address

The setting must be changed when the second
and subsequent servers are on the same
network as the first server.

«
...
108
109
110
111
112
...
»

Содержание primergy TX150


















































































































































































































































































































Отзывы:

Нет отзывов