Fujitsu Primergy RX300 S3, Руководство пользователя

Страница: 24 / 313

24
Chapter1 Overview
1.3.2 Server (Rear View)
a
Power supply unit 1 (installed as standard)
One power supply unit is installed by default. Up to two units can be installed.
Adding a power supply unit enables the redundant power supply function.
b
Power supply unit failure LED
The LED indicates the power supply unit status.
c
Power status LED
This LED is on, depending on the power supply status as follows.
d
Power supply unit 2 (Option)
e
Mouse connector (6 pins) ( )
A mouse is plugged in.
f
PCI slot
g
Inlet
Power cables are plugged in.
table: Power supply unit status
LED status Power supply unit status
Lights amber When a power supply unit fails
Off Normal mode or power off
table: Power supply status
LED status Power supply status
Lights green In normal mode (operating mode)
Lights amber In normal mode (standby mode)
Off Power not supplied (power off)
i
e d b
m n l k j
h g
f
a c
[Standard card slot]
[With basic card slot conversion mechanism]