Fujitsu Primergy RX300 S3, Руководство пользователя

Страница: 47 / 313

47
PRIMERGY RX300 S3 User’s Guide
2
Checkin
g before OS Inst
a
llatio
n
2.3 Precautions on Installation
Read the following notes before starting OS installation.
2.3.1 Installation Partition Size
For installation using ServerStart, the installation partition size can be set as follows, depending on the
OS to be installed and format.
●
Notes
• When you want to set the OS and BOOT partitions in different partitions, specify the partition size
directly.
(The BOOT partition is the partition for startup. Minimum information required for startup, such as
"ntldr", is stored.
The OS partition is the partition for installing the OS.)
• In either of the following cases, specify a partition size less than 2TB.
• When the same partition is specified as the OS and BOOT partitions
• When different partitions are specified as the OS and BOOT partitions
• The OS cannot be installed in a partition larger than 2TB.
2.3.2 Notes before OS Installation
Set the Write Policy of a logical drive of onboard SAS array controller (MegaRAID SAS 300-8E
ROMB) to Write Through until the installations of OS and the RAID Management Tool (Global Array
Manager) are completed. If you use the settings other than Write Through, change the setting after
completing the installation of the RAID Management Tool.
For setting and changing the Write Policy, refer to "MegaRAID SAS User’s Guide" in the Array
Controller Document & Tool CD.
2.3.3 Notes on Configuring RAID
RAID can be configured with hard disk units connected to the SAS controller on the baseboard.
For available RAID level, configuration of RAID and cautions, refer to "MegaRAID SAS User’s Guide"
in the Array Controller Document & Tool CD.
table: Installation Partition Size
Available size
Windows Server 2003
Windows Server 2003 x64
Windows 2000 Server
Minimum 2200MB 2048MB
Maximum 2TB 2TB