Fujitsu Primergy RX300 S3, Руководство пользователя, Страница: 154 / 313

154
Chapter 5 Operations after OS Installation
4
Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The respective tools will be created automatically. When a message appears indicating that the
disk is created, click [OK] and eject the disk.
5.4.2 Creating a DOS Floppy Disk
For DOS data stored into the floppy disk, refer to the file in the following folder of the ServerStart Disc
1 CD-ROM.
[CD-ROM drive] :\FreeDOS
To create a DOS floppy disk, you need an unused floppy disk. Prepare it in advance.
1
Start up ServerStart and Click [FloppyBuilder].
For details on procedures for starting up ServerStart, refer to "
■
Starting ServerStart" ( pg.151).
2
Click [DOS Diskette].
Insert the prepared floppy disk by following the message.
3
Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The DOS floppy disk will be created automatically.
When a message appears indicating that the disk is created, click [OK] and eject the disk.