manualshive.com logo in svg

Fujitsu Primergy RX300 S3, Руководство пользователя, Страница: 193 / 313

Поделиться
Скачать
Fujitsu Primergy RX300 S3 Скачать руководство пользователя страница 193

193

PRIMERGY RX300 S3 User's Guide

7

In

st

alling Internal 

O

ptions

5

Install memory modules.

Insert the memory module vertically in the memory slot while fitting the concavity.
When the memory module is properly installed, the levers on both sides of the slot are pulled 
back. At this time, confirm that the memory module is fixed. If the levers are not pulled back 
completely, make sure the levers are pushed inwards.

6

Attach the fan duct and the top cover.

"7.2 Installing/Removing the Top Cover" (pg.182)

7

Push the server back into the rack.

8

Initialize the Extended System Configuration Data (ESCD).

Set [Reset Configuration Data] to [Yes] in the Advanced menu of the BIOS Setup Utility.
See "Reset Configuration Data" in "8.1.5 The Advanced Menu" ( pg.235).

9

Save the BIOS configuration data.

"5.3 Storing the System Configuration Information" (pg.148)

• An improperly inserted memory module may cause a fire. Do not insert the

memory module in the wrong direction.

Lever

Align notch

Содержание Primergy RX300 S3


























































































































































































































































































































Отзывы:

Нет отзывов