Fujitsu PRIMERGY RX220, Руководство по эксплуатации, Страница: 45 / 87

RX220
Operating Manual 45
Preparation for Use and Operation Operating and Indicator Elements
11 LAN2 LED (green)
Lights up green when data is being transmitted or received by the LAN2
port through a network connection.
12 Global Error indicator (amber)
Does not light when the system is ok. No service incident or critical
event has occurred.
Flashes amber when a critical event has occurred. Users can check
BIOS Setup , system event log or via ServerView for event details. The
indicator also flashes in standby mode.
Lights amber when a prefailure event has been recognized. Users can
check system event log or via
ServerView
for event details. The indicator
also lights in standby mode.
If the event is still acute after a power failure, the indicator is activated
after the restart.
13 Identification (ID) indicator (blue)
Lights up blue when the system has been selected by pressing the
identification button (6). To deactivate, press the button again. The
identification indicator lights up synchronously with the corresponding
indicator on the rear.
The indicator can also be selected via ServerView and its status is also
reported to ServerView.
14,
15
HDD indicators (green, amber)
For explanation see “Hard disk drive control indicators” on page 46 .
Table 3: Operating elements and indicators on the front
!!