Fujitsu PRIMERGY RX220, Руководство по эксплуатации, Страница: 38 / 87

38 Operating Manual
RX220
Installing/Removing the Server into/from the Rack Hardware Installation
The server is removed in the reverse order.
V
CAUTION!
No cable management is available for the server!
Before the server is removed, all cables must be disconnected from their
sockets. Please note the instructions in
section “Installing/Removing the
Server into/from the Rack” on page 29 .
4.3.7 Mounting in 3rd-Party Racks
For mounting the server in the 3rd-Party Rack the following parts are necessary:
– one left and one right telescopic rail (assembled)
– possibly ten plugwashers
Ê Take the original manual of the rack manufacturer regarding the mechanical
installation and/or the climatic conditions to assistance.
V
CAUTION!
With the installation in 3rd-Party Rack it is to be made certain that the
air flow is ensured from the front to the rear in the rack.
Ê
Mount the necessary manufacturer original parts (like support bracket).
I
Sometimes a number of parts of the delivered mounting kit cannot be
used because original parts of the 3rd-Party Rack are to be used.
Ê
Mount the telescopic bars as described in section “Preparing the Server” on
page 33 .
Ê Secure the telescopic rails into the rack as described in section “Mounting in
the PRIMECENTER/DataCenter Rack” on page 34 .
Ê Mount the server (see “Installing the Server” on page 37 ) and route the
cables as described in the original manual of the rack.