Fujitsu PRIMERGY BX600 Скачать руководство пользователя страница 93

Страница: 93 / 289

Security Menu

Web-Based Management Interface

Intelligent Blade Panel Module

Non-Configurable Data

Current

- Indicates if this server is currently in use as the authentication server.

Secret Configured

- Indicates if the shared secret for this server has been configured.

Command Buttons

Submit

- Sends the updated screen to the IBP and causes the changes to take effect on

the IBP but these changes will not be retained across a power cycle unless a save is
performed.

Remove

- Remove the selected server from the configuration. This button is only available

to READWRITE users. These changes will not be retained across a power cycle unless a
save is performed.

Refresh

- Update the information on the page.

6.2.3.1.4 Viewing RADIUS Server Statistics Page

Selection Criteria

RADIUS Server IP Address

- Selects the IP address of the RADIUS server for which to

display statistics.

Non-Configurable Data

Round Trip Time (secs)

- The time interval, in hundredths of a second, between the most

recent Access-Reply/Access-Challenge and the Access-Request that matched it from this
RADIUS authentication server.

Access Requests

- The number of RADIUS Access-Request packets sent to this server.

This number does not include retransmissions.

Access Retransmissions

- The number of RADIUS Access-Request packets

retransmitted to this server.

Access Accepts

- The number of RADIUS Access-Accept packets, including both valid

and invalid packets that were received from this server.

Access Rejects

- The number of RADIUS Access-Reject packets, including both valid

and invalid packets that were received from this server.

Access Challenges

- The number of RADIUS Access-Challenge packets, including both

valid and invalid packets that were received from this server.

Malformed Access Responses

- The number of malformed RADIUS Access-Response

packets received from this server. Malformed packets include packets with an invalid
length. Bad authenticators or signature attributes or unknown types are not included as

Содержание PRIMERGY BX600


































































































































































































































































































Результаты поиска

Содержание PRIMERGY BX600

Отзывы:

Похожие инструкции для PRIMERGY BX600

Бренды по названию

Популярные бренды

Fujitsu PRIMERGY BX600, Описание пользовательского интерфейса

Результаты поиска

Содержание PRIMERGY BX600

Отзывы:

Похожие инструкции для PRIMERGY BX600

Бренды по названию

Популярные бренды