Fujitsu PRIMERGY BX600, Описание пользовательского интерфейса

Страница: 142 / 289

Device Configuration Commands Command Reference
Intelligent Blade Panel Module
141
7.4.1.2 show interface
This command displays the Port monitoring information for the system.
Syntax
show interface <slot/port>
<slot/port> -
is the desired interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf:
The physical slot and physical port.
Type:
If not blank, this field indicates that this port is a special type of port. The possible
values are:
PC Mbr
- This port is a member of a port-channel (LAG).
Description:
This description of a port.
Admin Mode:
Selects the Port control administration state. The port must be enabled in
order for it to be allowed into the network. – It may be enabled or disabled. The factory
default is enabled.
Physical Mode:
Selects the desired port speed and duplex mode. If auto-negotiation
support is selected, then the duplex mode and speed will be set from the auto-negotiation
process. Note that the port's maximum capability (full duplex -100M) will be advertised.
Otherwise, this object will determine the port's duplex mode and transmission rate. The
factory default is Auto.
Physical Status:
Indicates the port speed and duplex mode.
Link Status:
Indicates whether the Link is up or down.
Link Trap:
This object determines whether to send a trap when link status changes. The
factory default is enabled.
Flow Mode:
Displays flow control mode.
Capabilities Status:
Displays interface capabilities.
7.4.1.3 show interface counters
This command displays a summary of statistics for a specific interface or all interfaces.
Syntax
show interface counters {<slot/port> | all}
<slot/port> -
is the desired interface number.