Fujitsu PRIMERGY BX600 Скачать руководство пользователя страница 81

Страница: 81 / 289

Panel Settings Menu

Web-Based Management Interface

Intelligent Blade Panel Module

Last Attempt Time

- Specifies the local date and time (UTC) that this SNTP server was

last queried.

Last Attempt Status

- Specifies the status of the last SNTP request to this server. If no

packet has been received from this server, a status of Other is displayed.

•

Other

None of the following enumeration values.

•

Success

The SNTP operation was successful and the system time was

updated.

•

Request Timed Out

A directed SNTP request timed out without receiving a

response from the SNTP server.

•

Bad Date Encoded

The time provided by the SNTP server is not valid.

•

Version Not Supported

TheSNTP version supported by the server is not

compatible with the version supported by the client.

•

Server Unsychronized

The SNTP server is not synchronized with its peers.

This is indicated via the 'leap indicator' field on the SNTP message.

•

Server Kiss Of Death

The SNTP server indicated that no further queries were

to be sent to this server. This is indicated by a stratum field equal to 0 in a message
received from a server.

Unicast Server Num Requests

- Specifies the number of SNTP requests made to this

server since last time agent reboot.

Unicast Server Num Failed Requests

- Specifies the number of failed SNTP requests

made to this server since last reboot.

Содержание PRIMERGY BX600


































































































































































































































































































Результаты поиска

Содержание PRIMERGY BX600

Отзывы:

Похожие инструкции для PRIMERGY BX600

Бренды по названию

Популярные бренды

Fujitsu PRIMERGY BX600, Описание пользовательского интерфейса

Результаты поиска

Содержание PRIMERGY BX600

Отзывы:

Похожие инструкции для PRIMERGY BX600

Бренды по названию

Популярные бренды