Fujitsu PRIMERGY BX600, Описание пользовательского интерфейса

Страница: 238 / 289

Security Commands Command Reference
Intelligent Blade Panel Module
237
no -
This command sets the authentication mode to be used on all ports to 'auto'.
Default Setting
auto
Command Mode
Global Config
This command sets the authentication mode to be used on the specified port. The control
mode may be one of the following.
force-unauthorized:
The authenticator PAE unconditionally sets the controlled port to
unauthorized.
force-authorized:
The authenticator PAE unconditionally sets the controlled port to
authorized.
auto:
The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator, and the authentication server.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
no -
This command sets the authentication mode to be used on the specified port to 'auto'.
Default Setting
auto
Command Mode
Interface Config
7.9.3.7 dot1x max-req
This command sets the maximum number of times the authenticator state machine on this port
will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. The
<1-10> value must be in the range 1 - 10.
Syntax