Fujitsu PRIMERGY BX600 Скачать руководство пользователя страница 143

Страница: 143 / 289

Device Configuration Commands Command Reference

Intelligent Blade Panel Module

142

all -

This command displays statistics information for all interfaces.

Default Setting

None

Command Mode

Privileged Exec

Display Message

The display parameters when the argument is '<slot/port>' are as follows:

Packets Received Without Error:

The total number of packets (including broadcast

packets and multicast packets) received by the processor.

Packets Received With Error:

The number of inbound packets that contained errors

preventing them from being deliverable to a higher-layer protocol.

Broadcast Packets Received:

The total number of packets received that were directed to

the broadcast address. Note that this does not include multicast packets.

Packets Transmitted Without Error:

The total number of packets transmitted out of the

interface.

Transmit Packets Errors:

The number of outbound packets that could not be transmitted

because of errors.

Collisions Frames:

The best estimate of the total number of collisions on this Ethernet

segment.

Time Since Counters Last Cleared:

The elapsed time, in days, hours, minutes, and

seconds since the statistics for this port were last cleared.

The display parameters when the argument is 'all' are as follows:

Interface:

The physical slot and physical port or the logical slot and logical port.

Summary:

The summation of the statistics of all ports.

Packets Received Without Error:

The total number of packets (including broadcast

packets and multicast packets) received.

Packets Received With Error:

The number of inbound packets that contained errors

preventing them from being deliverable to a higher-layer protocol.

Broadcast Packets Received:

The total number of packets received that were directed to

the broadcast address. Note that this does not include multicast packets.

Packets Transmitted Without Error:

The total number of packets transmitted.

Transmit Packets Errors:

The number of outbound packets that could not be transmitted

because of errors.

Collisions Frames:

The best estimate of the total number of collisions on this Ethernet

segment.

This command displays detailed statistics for a specific port or for all CPU traffic based upon
the argument.

Содержание PRIMERGY BX600


































































































































































































































































































Результаты поиска

Содержание PRIMERGY BX600

Отзывы:

Похожие инструкции для PRIMERGY BX600

Бренды по названию

Популярные бренды

Fujitsu PRIMERGY BX600, Описание пользовательского интерфейса

Результаты поиска

Содержание PRIMERGY BX600

Отзывы:

Похожие инструкции для PRIMERGY BX600

Бренды по названию

Популярные бренды