Fujitsu PRIMERGY BX600 S3, Руководство по оборудованию, Страница: 37 / 103

37
PRIMERGY BX600 S3 Blade Server System Unit Hardware Guide
2
Install the Server Blade/Storage Blade.
1. Open the release latches and insert the Server Blade/Storage Blade until it stops.
2. When inserted, close the release
latches to complete insertion.
The procedure for installing the dummy Server Blade is the same as that for installing the
Server Blade/Storage Blade.
3
Connect cables when using the expansion card slot module for the Server
Blade.
In order to move the cables connected to the expansion card slot of the Server Blade out
of the way, create space in the lower part of the Chassis and pull towards the rear of the
server.
To operate the Storage Blade, the Storage Blade must be connected to the Server Blade
with the SAS cable. For connection, refer to "SX650 Storage Blade Hardware Guide".
Before installing the Server Blade/Storage Blade, check there is no dust in the blade
connector.
Before closing the release latches, make sure the Server Blade/Storage Blade is
inserted completely to the slot.
(2)
(1)
(2)
Release latches