Fujitsu PRIMERGY BX600 S3 Скачать руководство пользователя страница 25

Страница: 25 / 103

PRIMERGY BX600 S3 Blade Server System Unit Hardware Guide

Power off the display and peripheral devices.

The server can be remotely turned on/off from the management terminal using Management Blade.

→

"BX600 Management Blade Hardware Guide"

The power supply of each Server Blade can be turned off remotely from the management terminal

using the attached ServerView software. For details, refer to "ServerView User’s Guide 3.2 Monitoring

Servers".

■

Notes on power supply operations (for Windows)

The following modes can be specified for the Server Blade power switch using the OS settings.

• For Windows Server 2003 or Windows Server 2008

"Do Nothing", "Prompt Input" (only for Windows Server 2003), "Standby", "Hibernation", or "Shut

down" (normally, "Shut down" is specified).

• For Windows 2000 Server

"Standby", "Hibernation", "Power off" (normally "Power off" is specified).

On this Server Blade, functions corresponding to "Standby" and "Hibernation" are supported as BIOS

and hardware functions. However, some drivers and software installed in the Server Blade do not

support these functions. For this reason, functions corresponding to "Standby" and "Hibernation" are

unavailable on this server.

When the operating mode is set to "Standby" or "Hibernation", the system may operate improperly or

hard disk data may be corrupted.

For details about operating mode settings, refer to the OS manual.

For Windows Server 2003, by changing the power switch operating mode "Do Nothing", or "Prompt

Input", prevents the OS being shutdown by mistakenly pressing the power switch during operation.

Содержание PRIMERGY BX600 S3








































































































Результаты поиска

Содержание PRIMERGY BX600 S3

Отзывы:

Fujitsu PRIMERGY BX600 S3, Руководство по оборудованию, Страница: 25 / 103

Результаты поиска

Содержание PRIMERGY BX600 S3

Отзывы: