Fujitsu PRIMERGY BX600 S3 Скачать руководство пользователя страница 34

Страница: 34 / 103

Chapter 4 Installing Options

4.2 Installing Server Blades/Storage

Blades

This section explains how to install/remove Server Blades and Storage Blades.

For this server, even when the power supply of the Chassis is turned on, it is possible

to install/remove (hot-swap/hot-plug) Server Blades.

For details about a Server Blade, refer to each Server Blade's "User's Guide", and for

details about a Storage Blade, refer to "SX650 Storage Blade Hardware

Guide".

4.2.1 Before Installing

■

Notes when installing and removing

Server Blades/Storage Blades can be installed/removed when the main power of the Chassis is turned

on. In this case note the following points.

■

Installable Server Blades/Storage Blades

The following Server Blades or Storage Blades can be installed in the Chassis.

• BX620 S3 Server Blade

• BX620 S4 Server Blade

• SX650 Storage Blade

• Always turn off the power of the Server Blade.

"3.3 Turning Off the Server" (p.24)

• Check that the system fan unit is operating correctly before installing or removing the blade

server. If it is broken, the blade server cannot be installed/removed during operation.

• Because the heat sink area of the Server Blade reaches high temperatures, do not touch it

directly after removal.

• Be careful not to pinch fingers or clothes. This may cause injury.

• When removing the Server Blade/Storage Blade/dummy Server Blade, do not insert your

hand into the Server Blade slot. Doing so may cause electric shock.

Содержание PRIMERGY BX600 S3








































































































Результаты поиска

Содержание PRIMERGY BX600 S3

Отзывы:

Похожие инструкции для PRIMERGY BX600 S3

Бренды по названию

Популярные бренды

Fujitsu PRIMERGY BX600 S3, Руководство по оборудованию

Результаты поиска

Содержание PRIMERGY BX600 S3

Отзывы:

Похожие инструкции для PRIMERGY BX600 S3

Бренды по названию

Популярные бренды