Fujitsu PRIMEQUEST 400 Series, Руководство по установке, Страница: 60 / 446

2-14 C122-E001-10EN
CHAPTER 2 Setup
Table 2.2 Status display
When the user has only the display authority, input field, radio button, and check
box are displayed dimmed (not selectable).
z
Button area
Buttons for setting the status display and setting the setting area contents are
displayed. The [Apply] and [Cancel] buttons are normally displayed.
For contents that are displayed only and do not require user input, this button area
is not displayed.
Basic operation
The basic operation flow is as follows:
1 Select a menu from the navigation bar.
The submenu of the selected menu is displayed in the sub-menu area.
2
Select a menu from the sub-menu.
The window of the selected menu is displayed in the content area.
3
Check and set information on the displayed window.
Click the [Apply] button to set the information.
Click the [Cancel] button to return the information to its state before it was input.
Remarks: To return to the upper hierarchy, click the [
←
] (Back) button on the
IE toolbar.
The upper-hierarchy screen is displayed in the content area.
Note: If the MMB Web-UI is used from Internet Explorer and the dialog box for
process execution confirmation or process completion notification is
displayed for more than two minutes, the MMB Web-UI is disconnected.
In such cases, log in to the MMB Web-UI again.
Status Background color
Normal Typical window background color
Warning Warning color (yellow)
Error Error color (red)