Fujitsu PRIMEQUEST 400 Series, Руководство по установке, Страница: 414 / 446

E-2 C122-E001-10EN
Appendix E Setting Item List
System Event
Log Filter
Button Setting of event
log filtering
conditions Selection of
whether to begin
event output
with the first
event or specify
the time Start Date/
Time First event • First event
• Specified Time When Time is
selected, the start
time can be entered.
Switching between
First Event and
Time retains the
specified time data
Selection of
whether to end
event log output
with the last
event or specify
the time End Date/
Time End event • End event
• Specified Time When Time is
selected, the end
time can be entered.
Switching between
Last Event and
Time retains the
specified time data
Specification of
the number of
log events to be
displayed Number of
events to
display 100 events An integer equal to or
greater than 0 and less
than the denominator
of the displayed
fraction The denominator of
the displayed
fraction indicates
the total number of
logged events.
System
Information System name
setting Setting
PRIMEQUEST
system name System Name PRIMEQUEST
brand name +
Serial number
Up to 64 characters
can be entered. Used also as an
SNMP system name
Asset tag
information
setting Asset
management
information
setting Asset Tag None Up to 32 characters
can be entered.
System Setup
Power-related
setting Setting power
for
PRIMEQUEST
system Power Feed
Mode Single • Single (single
power feed mode)
• Dual (dual power
feed mode)
Setting
procedure for
power recovery Power
Restore
Policy Restore • Always OFF
• Always ON
• Restore
Setting
procedure when
redundancy is
lost Power Fault
Reaction Continue • Continue
• Shutdown
Setting delay
time till OS
shutdown
begins after
UPS detects AC
Lost Shutdown
Delay after
UPS detects
AC Lost 5 s 0 to 9999 s
Window Major category Minor category Setting item Default value Possible values Remarks