Preparation for use and operation
The notebook battery
24
A26391-K82-Z101-3-7619
Connecting the car adapter
You can use the car adapter if the car has a 12 V electrical system.
Switch off the notebook.
Place the notebook on a flat, sturdy surface.
Install the notebook battery.
1
2
Connect the car adapter cable to the DC jack (DC IN) of the notebook (1).
Start the car's engine.
!
You should only use the car adapter while the car's engine is running. You must not start
the car's engine while the car adapter is connected to the car's electrical system.
Do not place the car adapter on heat-sensitive material. Whilst in operation, the car
adapter must be free-standing and must not be covered.
Keep other objects 100 mm clear of the notebook. Do not cover the ventilation slots in
the notebook.
Plug the car adapter's input connector into the car's cigarette lighter (2).
After a few seconds the notebook's battery status indicator on the front lights up. The notebook
battery is being recharged.
