manualshive.com logo in svg

Fujitsu PRIMEPOWER 800, Руководство по эксплуатации

Поделиться
Скачать
Fujitsu PRIMEPOWER 800 Скачать руководство пользователя страница 13

 

A26391-K82-Z101-3-7619

3

Important notes

In this chapter you will find information regarding safety which it is essential to take note of when
working with your notebook. The manufacturer's notes contain helpful information on your notebook.

Safety

!

Pay attention to the information provided in the manual "Safety Notes".

• 

During installation and before operating the device, please observe the instructions on
environmental conditions in the chapter entitled "

Technical data

" as well as the instructions in

the chapter "

Preparation for use and operation

".

• 

When cleaning the device, please observe the relevant notes in the paragraph "

Cleaning the

notebook

".

• 

Keep this Operating Manual together with your device. If you pass on the device to third
parties, you should include this manual.

Notes on installing and removing boards

!

Only qualified technicians should repair the device. Unauthorized opening or incorrect
repair may greatly endanger the user (electric shock, fire risk).

Boards with electrostatic sensitive devices (ESD) are identifiable by the
label shown.

When you handle boards fitted with ESDs, you must observe the following
points under all circumstances:

• 

You must always discharge yourself (e.g. by touching a grounded
object) before working.

• 

The equipment and tools you use must be free of static charges.

• 

Pull out the power plug before inserting or pulling out boards containing
ESDs.

• 

Always hold boards with ESDs by their edges.

• 

Never touch pins or conductors on boards fitted with ESDs.

Содержание PRIMEPOWER 800























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды